.485+… mgmtplane: /usr/sw nginxUtils.cpp:355 (BASE_UTILS - 0x00000000) XmlSwitchThread(8)@mgmtplane(9) WARN Starting nginx
.486+… appuser[1]: /usr/sw main.cpp:2843 (SOLDAEMON - 0x00000000) main(0)@solacedaemon WARN Starting dynamic child: nginx -c /var/lib/solace/config/nginx.conf -g “pid /var/run/solace/nginx.pid;” 2>/usr/sw/jail/diags/nginx_startup.log
.495+… mgmtplane: /usr/sw logging.cpp:382 (BASE_LOG - 0x00000001) MplThread(3)@mgmtplane(9) WARN Restarting syslog service (15).
T13:22:56.960+… appuser[322]: /usr/sw watchdog.cpp:1419 (WATCHDOG - 0x00000000) Watchdog(3)@watchdog(15) WARN Did not get poll response from MplThread(3)@mgmtplane(9), sequence number = 3, attempt = 1
T13:23:02.036+… appuser[322]: /usr/sw watchdog.cpp:1419 (WATCHDOG - 0x00000000) Watchdog(3)@watchdog(15) WARN Did not get poll response from MplThread(3)@mgmtplane(9), sequence number = 3, attempt = 2
T13:23:07.041+… appuser[322]: /usr/sw watchdog.cpp:1419 (WATCHDOG - 0x00000000) Watchdog(3)@watchdog(15) WARN Did not get poll response from MplThread(3)@mgmtplane(9), sequence number = 3, attempt = 3
…
T13:25:22.228+… appuser[322]: /usr/sw watchdog.cpp:1419 (WATCHDOG - 0x00000000) Watchdog(3)@watchdog(15) WARN Did not get poll response from MplThread(3)@mgmtplane(9), sequence number = 3, attempt = 30
T13:25:22.228+00:00 <local0.err> .. appuser[322]: /usr/sw watchdog.cpp:1506 (WATCHDOG - 0x00000000) Watchdog(3)@watchdog(15) ERROR Did not get poll response from MplThread(3)@mgmtplane(9) after 30 attempts @ cycle count 29188297435510 → checking for other unresponsive threads
T13:25:22.228+… appuser[322]: /usr/sw watchdog.cpp:1543 (WATCHDOG - 0x00000000) Watchdog(3)@watchdog(15) WARN Performing broadcast poll attempt 1 of maximum 3 to check for unresponsive threads
T13:25:22.296+… appuser[322]: /usr/sw watchdog.cpp:1615 (WATCHDOG - 0x00000000) Watchdog(3)@watchdog(15) WARN Total of 67 polls broadcast on poll attempt 1 - starting retry timer = 5000ms
T13:25:22.299+… appuser[322]: /usr/sw watchdog.cpp:1359 (WATCHDOG - 0x00000000) Watchdog(3)@watchdog(15) WARN Marking LINECARD for core due to failure of a different thread/proc
…
T13:25:22.299+… appuser[322]: /usr/sw watchdog.cpp:1350 (WATCHDOG - 0x00000000) Watchdog(3)@watchdog(15) WARN Marking pid 331 for core due to failure of a different thread/proc
T13:25:22.299+… appuser[322]: /usr/sw watchdog.cpp:1350 (WATCHDOG - 0x00000000) Watchdog(3)@watchdog(15) WARN Marking pid 326 for core due to failure of a different thread/proc
Thank you
Daniele
3/3